How to Adjust Your Zyrus Watch

Welcome to the Zyrus guide! Here, we will show you step by step how to easily adjust your Zyrus watch to fit perfectly around your wrist. With every Zyrus watch, you will receive a handy pin remover and extra links, allowing you to customize the band to your liking.

Step 1: Gather Your Tools

To adjust your Zyrus watch, you will need the included pin remover, along with the extra links that came with your Zyrus watch. These tools make it easy to remove or add links to achieve the perfect fit.

Tip: Place your watch on a soft cloth or surface to prevent scratches during the process.

Step 2: Determine the Right Size

Before you start adjusting the band, it’s important to estimate whether you need to make the band longer or shorter.

  • Is the band too tight? Consider adding extra links for a more comfortable fit.
  • Is the band too loose? Remove a few links to ensure the band fits better.

Step 3: Locate Adjustable Links

Zyrus watches have links that you can remove or add. Look at the back of the band and search for small arrows indicating which links can be removed.

Step 4: Remove or Add Links with the Pin Remover

  • Use the included pin remover to push the pins out of the links. Place the end of the pin remover into the small hole and gently press the pin out in the same direction as the arrow, as shown in the photo.
  • Remove links to make the band shorter, or add the extra links to make it longer.

Tip: Keep all removed pins and links safe, in case you need them later.

Step 5: Reattach the Band

  • Once you have determined the desired length, slide the pins back into the links rounded end first, following the arrows in the opposite direction.
  • Use the pin remover to push the last part of the pin back into the band, doing this carefully to avoid scratches as shown in the photo.

Step 6: Check the Fit

Put your watch on to check if it sits comfortably. The band should be snug enough to stay in place but not so tight that it pinches.

Does the fit still not feel right? Go back to step 4 to remove or add more links until you achieve the perfect size.